Give your shower a sparkling finish with Wet & Forget's shower spray! This shower cleaner is another effective, labour-saving product from the Wet & Forget family. Simply spray your shower area or bath with the high-efficiency sprayer included in the bottle, then the next time that you want to use your shower, simply rinse the surfaces that you have sprayed for sparkling clean results.
DIRECTIONS FOR WEEKLY USE: After showering or using the bath, spray Wet & Forget on all fixtures, shower curtains, enclosures, shower glass, tiles and your bathtub. Then simply rinse all surfaces including the shower base or bathtub thoroughly before re-entering for your next shower or bath.
HOW TO USE THE SPRAYER:1. Open flip cap closure 2. Remove sprayer from slot in handle. Undo wire and pull hose plug to completely extend tubing to 100cm. 3. Firmly press hose plug into opening on cap until it clicks into place. 4. Slide ON/OFF lever to ‘OPEN’ position. 5. Rotate nozzle to desired setting ‘SPRAY / STREAM’.
AFTER USE: To store, turn sprayer nozzle to ‘OFF’ position (5) and turn lever to ‘CLOSED’ position (4). DO NOT disconnect hose plug. To avoid leakage return the sprayer to its slot in the handle and keep in an upright position always.
PLEASE NOTE: This product will not remove hard mineral deposits (water spotting). Do test spot if you have dark tiles and hard water so as not to highlight calcium deposits. Wet & Forget Shower will not remove mould stains found inside silicon seals and black mould in grouting will take time.
